SHURE BLX14RE/SM31 - безжичен микрофон за вграждане в рак с хедсет SM31-FH, водоустойчив

SHURE BLX14RE/SM31 - безжичен микрофон за вграждане в рак с хедсет SM31-FH, водоустойчив

1,136.00 лв.
Код на продукта: ZMBLX14RESM31
Наличност: Не е в наличност
Безплатна доставка за поръчки над 50 лв
Връщане на продукт в рамките на 14 дневен срок
на 12 вноски по 111.82 лв.

Вземи желания продукт сега, избери подходяща за теб схема на изплащане:

Не е нужно да избираш, може да имаш всичко!
Купи на равни вноски стоки от 100 до 30000 лв., избери най-подходящата за теб вноска.
С TBI Pay, пазаруването е лесно, гъвкаво и напълно онлайн.
Контролът е в твоите ръце, не чакай.

Добави в количката
Заяви и купи сега
Купи на изплащане

BLX14RE/SM31 - безжична система за глава с SM 31-FH, водоустойчив, подходящ за фитнес, танци или аеробика инструктори

Включва: BLX4R single channel half-rack wireless receiver with rack mount kit; BLX1 bodypack transmitter; SM31 cardioid condenser headworn microphone with windscreen; PS23 power supply.


Comfortable wireframe for secure fit
Smooth, natural frequency response comparable to quality handheld microphones
Reliable at temperature and humidity extremes
Power and battery status LED
Adjustable gain control
Quick and easy frequency matching
AA batteries (included) provide up to 14 hours of continuous use
100 m (300 ft.) operating range (line of sight)
One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference)
Up to 12 compatible systems per frequency band (region-dependent)
XLR and ¼” output connectors
Two-color audio status indicator LED
Green: Normal audio levels
Red: Excessive audio levels (overload/clipping)
Adjustable output level 
Removable antennas for quick antenna distribution
LC Display with detailed RF and audio metering
Rack mount kit included
RACK MOUNT BRACKET, part number: 53A8611
LONG RACK MOUNT BRACKET, part number: 53A8612
LINK BRACKET, part number: 53B8443
HARDWARE KIT, part number: 90AZ8100
Swivel adater, part number: 90F4046
Thread adapter, part number: 31B1856
2x, ANTENNA/BNC,1/4 WAVE, part number: 95A8699 
2x, ADAPTER,BULKHEAD,BNC, part number: 95A8994
BAG VINYL, ZIPPERED, part number: 95B2313
2x, CABLE,BNC,22 in., part number: 95K2035
Power supply PS23

Compatible systems per frequency band (up to): 12
Selectable frequencies: 150
Auto Setup Features: QuickScan : Finds group with most compatible frequencies and sets to best frequency
Audio Reference Companding: No
Included Antennas: BLX4, BLX88: Internal, BLX4R: Detachable
Antenna Options: No
Receiver Network Ability: No
PC Control: No
Rack Hardware: URT2 (not included), Rack mount brackets (only with rackable/BLX-R Sets)
Case: No
Transmitter Display: LED
Receiver Display: BLX4, BLX88: LED, BLX4R: High-resolution LCD screen
Battery, Endurance: 2AA, up to 14h
Environment: Small to medium stages
Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
Audio Range: 50–15,000 Hz (dependent on microphone type)
Transmitter RF Output Power: 10 mW, typical (varies by region)
Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
Battery Life: Up to 14 hours
Dynamic Range: 100 dB A-weighted
System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
BLX4R: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)
Output Impedance:
- XLR connector: 200 O
- 6.35 mm (1/4") connector: 50 O
Audio Output Level, Ref. ±33 kHz deviation with 1 kHz tone:
- XLR connector: –20.5 dBV (into 100 kO load)
- 6.35 mm (1/4") connector: –13 dBV (into 100 kO load)
RF Sensitivity: -105 dBm for 12 dB SINAD, typical
Image Rejection: >50 dB, typical
Dimensions: 50 mm X 198 mm X 163 mm H x W x D
Weight, without antennas: 998 g
Housing: Molded ABS, steel
Power Requirements: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)
Audio Input Level:
- gain max: -16 dBV maximum
- gain min (0 dB): +10 dBV maximum
Gain Adjustment Range: 26 dB
Input Impedance: 1 MΩ
RF Transmitter Output: 10 mW, typical, varies by region
Dimensions: 110 mm x 64 mm x 21 mm (H x W x D)
Weight: 75 g, without batteries
Housing: Molded ABS
Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
Battery Life: up to 14 hours (alkaline)